Posted by : Anonymous Thursday, February 24, 2011


Well here I am going to discuss a very easy and very effective way of hacking the PTCL Broadband users in Pakistan. As you all know the PTCL Broadband gives a Router ( some call it Modem) from which we connect to the internet. What exactly this Router is that it contain the settings about connecting the internet.

       The Hack goes like this that all the Routers have 3 ports open. Two of them are :


  •  Port 23 : Telnet Server Port.
  •  Port 80 : Http Server Port.
This is perfectly normal but the problem is that nearly all the user don't care to change the Default User Name and Password. So if you find the IP address of PTCL user then you can connect to these ports and do what ever with them that you want.

STEP 1: Finding the IP address.


Well this could be difficult. But there are two ways:



  1. First is to check your Public IP Address at http://whatismyipaddress.com/ and than scan the nearby IP addresses. e.g. If my IP address is 182.177.252.166 than I would scan from 182.177.252.1 to 182.177.252.250 . Because we connect the internet with Dynamic IP addresses it means that nearby IP address would also be PTCL Broadband users. 
  2. The other way can be to run netstat -an command in command prompt to see the IP address of people whom you are chatting.                                                                                                          

STEP 2: Connecting to Telnet or Http Server.


Connecting to Telnet server: Well now when we have the IP address just goto start => RUN then type cmd.exe in it. and following screen will appear . Then type followin into it telnet {IP ADDRESS}.


NOW THIS SCREEN WILL APPEAR: 


NOTE::::::::::::::::::::::::::::::::::
The Default Username is: admin
The Default Password is: admin


or


Username is : user
Password is : user
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::


Now after you have given the user name and Password following screen will appear  . Type "help" in it to get all the commands and to whatever with it. BUT BE IN LIMITS!!!!


screen shot of hacked router:




Connecting to Http server: Well all the steps are same but this time you use your browser to access the  router like show below.

NOTE::::::::::::::::::::::::::::::::::
The Default Username is: admin
The Default Password is: admin


and after that:


Disclaim:----------------------------------------------------------------------
I take no responsibility of any stupid thing did by any one of you with this information. I just showed you how to do it. Best way of testing it is to hack your self like i Did in this tutorial.

{ 34 comments... read them below or Comment }

  1. is this possible then only i try plzz tell me

    ReplyDelete
  2. yes this is possible on all routers. Over here i have done it on PTCL Router

    ReplyDelete
  3. ohhk n how we have 2 search the ip

    ReplyDelete
  4. it is explained.. or you can social engineer

    ReplyDelete
  5. i m nt understanding how 2 get ip thats y i m asking

    ReplyDelete
  6. This comment has been removed by a blog administrator.

    ReplyDelete
  7. For finding the Ip Address SEE THIS

    http://hackthepc.blogspot.com/2011/01/how-to-get-someone-ip-through.html

    ReplyDelete
  8. Can you please tell me how to recover the admin password? I used to change it frequently & forgot the last one.

    ReplyDelete
  9. Well sir idea is to BRUTE FORCE the Admin Password with Brutus.

    ReplyDelete
  10. I have opened DSL router config of someone
    now how can i get any benefit out of it?
    like using his bandwidth etc??

    ReplyDelete
  11. yar who to find our forgoton router password

    ReplyDelete
  12. my router password is not admin admin        plz help me if any 1 know 

    ReplyDelete
  13. is there any method to hack speed? like if i can login with there username ? is it posible

    ReplyDelete
  14. What the hell is this ? so what rocket science you would like to tell us ? now what can I do after login to last screen ?

    ReplyDelete
  15. You can actually FUCK-OFF! :P

    ReplyDelete
  16. Maybe, but i do not know about it.

    ReplyDelete
  17. you can recover password by Resting modem
    there is small hole on right side of modem where RESET key word written.Click on button for 6 seconds.then your modem will restart and all default setting will configure.Now the password is admin and username also admin

    ReplyDelete
  18. @zakir  reset your dsl modem.. the reset button is at the backside of your modem..actully its not a button..its a small hole...and you need to press the button in the hole using a thin pin.....and hold it for 10 to 15 seconds..your modem will be reset to factory setting and you default password is now admin : admin 

    ReplyDelete
  19. if telnet is not allowed means disabled by administrator and http is also require a password which is also not known then ?

    ReplyDelete
  20. if user password is not admin admin and also not user user then which would be

    ReplyDelete
  21.  Hello, I love reading through your blog, I wanted to leave a little comment to support you and wish you a good continuation. Wish you best of luck for all your best efforts. best of luck

    ReplyDelete
  22. the cmd commond is
    telnet 182.187.84.27
    but its not connected with near ip please help me
    i am try form
    182.187.84.1 to 182.187.84.50

    ReplyDelete
  23. if i try to run the command on my cmd it tells me access denial

    ReplyDelete
  24. how to get the ip address of others

    ReplyDelete
  25. how to hack it after laast step plz tell im goin crazy

    ReplyDelete
  26. r u kid lol , is it hack ? hahaha its relly fool lol`

    ReplyDelete
  27. if we need others ip just goto www.whatismyip.com and paste on adders bar and change into next for e.g= 192.168.1.1 > 192.168.1.2 > 192.168.1.3 > 192.168.1.4 max value is 192.168.1.255 not bigger then (255) ,,,,,, BY 84sHackers if i hack ur modem plese don't abuse me
    !!!! XD

    ReplyDelete
  28. how to hack internet speed from this meathod ????

    ReplyDelete
  29. This is not hacking. This service is already provided with the time of connection to the costumers

    ReplyDelete
  30. what the fuck idiot method. u copier, u can just do it with ur own ip. not with others , what a noob article copier.

    ReplyDelete
  31. there is no "telnet" comand in window 10... :(

    ReplyDelete
  32. bhai jan mujy btayn k > help kasy type krna ha

    ReplyDelete
  33. ya mujy pagle lgta hai bhin chod

    ReplyDelete

Popular Post

Labels

Blog Archive

- Copyright © _.:Learn To Hack:._ :: Hacking Tutorials :: Warez -Metrominimalist- Powered by Blogger - Designed by Johanes Djogan -