Thursday, February 24, 2011
The Hack goes like this that all the Routers have 3 ports open. Two of them are :
- Port 23 : Telnet Server Port.
- Port 80 : Http Server Port.
STEP 1: Finding the IP address.
Well this could be difficult. But there are two ways:
- First is to check your Public IP Address at http://whatismyipaddress.com/ and than scan the nearby IP addresses. e.g. If my IP address is 182.177.252.166 than I would scan from 182.177.252.1 to 182.177.252.250 . Because we connect the internet with Dynamic IP addresses it means that nearby IP address would also be PTCL Broadband users.
- The other way can be to run netstat -an command in command prompt to see the IP address of people whom you are chatting.
STEP 2: Connecting to Telnet or Http Server.
Connecting to Telnet server: Well now when we have the IP address just goto start => RUN then type cmd.exe in it. and following screen will appear . Then type followin into it telnet {IP ADDRESS}.
NOW THIS SCREEN WILL APPEAR:
NOTE::::::::::::::::::::::::::::::::::
The Default Username is: admin
The Default Password is: admin
or
Username is : user
Password is : user
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Now after you have given the user name and Password following screen will appear . Type "help" in it to get all the commands and to whatever with it. BUT BE IN LIMITS!!!!
screen shot of hacked router:
Connecting to Http server: Well all the steps are same but this time you use your browser to access the router like show below.
NOTE::::::::::::::::::::::::::::::::::
The Default Username is: admin
The Default Password is: admin
and after that:
Disclaim:----------------------------------------------------------------------
I take no responsibility of any stupid thing did by any one of you with this information. I just showed you how to do it. Best way of testing it is to hack your self like i Did in this tutorial.
is this possible then only i try plzz tell me
ReplyDeleteyes this is possible on all routers. Over here i have done it on PTCL Router
ReplyDeleteohhk n how we have 2 search the ip
ReplyDeleteit is explained.. or you can social engineer
ReplyDeletei m nt understanding how 2 get ip thats y i m asking
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteFor finding the Ip Address SEE THIS
ReplyDeletehttp://hackthepc.blogspot.com/2011/01/how-to-get-someone-ip-through.html
Can you please tell me how to recover the admin password? I used to change it frequently & forgot the last one.
ReplyDeleteWell sir idea is to BRUTE FORCE the Admin Password with Brutus.
ReplyDeleteI have opened DSL router config of someone
ReplyDeletenow how can i get any benefit out of it?
like using his bandwidth etc??
yar who to find our forgoton router password
ReplyDeletemy router password is not admin admin plz help me if any 1 know
ReplyDeleteis there any method to hack speed? like if i can login with there username ? is it posible
ReplyDeleteWhat the hell is this ? so what rocket science you would like to tell us ? now what can I do after login to last screen ?
ReplyDeleteYou can actually FUCK-OFF! :P
ReplyDeleteMaybe, but i do not know about it.
ReplyDeleteyou can recover password by Resting modem
ReplyDeletethere is small hole on right side of modem where RESET key word written.Click on button for 6 seconds.then your modem will restart and all default setting will configure.Now the password is admin and username also admin
@zakir reset your dsl modem.. the reset button is at the backside of your modem..actully its not a button..its a small hole...and you need to press the button in the hole using a thin pin.....and hold it for 10 to 15 seconds..your modem will be reset to factory setting and you default password is now admin : admin
ReplyDeleteif telnet is not allowed means disabled by administrator and http is also require a password which is also not known then ?
ReplyDeleteif user password is not admin admin and also not user user then which would be
ReplyDeleteHello, I love reading through your blog, I wanted to leave a little comment to support you and wish you a good continuation. Wish you best of luck for all your best efforts. best of luck
ReplyDeletethe cmd commond is
ReplyDeletetelnet 182.187.84.27
but its not connected with near ip please help me
i am try form
182.187.84.1 to 182.187.84.50
if i try to run the command on my cmd it tells me access denial
ReplyDeletehow to get the ip address of others
ReplyDeletehow to hack it after laast step plz tell im goin crazy
ReplyDeleter u kid lol , is it hack ? hahaha its relly fool lol`
ReplyDeleteif we need others ip just goto www.whatismyip.com and paste on adders bar and change into next for e.g= 192.168.1.1 > 192.168.1.2 > 192.168.1.3 > 192.168.1.4 max value is 192.168.1.255 not bigger then (255) ,,,,,, BY 84sHackers if i hack ur modem plese don't abuse me
ReplyDelete!!!! XD
how to hack internet speed from this meathod ????
ReplyDeleteThis is not hacking. This service is already provided with the time of connection to the costumers
ReplyDeletewhat the fuck idiot method. u copier, u can just do it with ur own ip. not with others , what a noob article copier.
ReplyDeletethere is no "telnet" comand in window 10... :(
ReplyDeletebhai jan mujy btayn k > help kasy type krna ha
ReplyDeleteya mujy pagle lgta hai bhin chod
ReplyDelete