INTRODUCTION :Many Windows users here are struggling to hack WiFi networks because most of the tutorials are based on BackTrack and other Linux Tools .

Im just sharing the method to Crack WiFi networks using WEP security protocol . The WEP is a very vuarable to attacks and can be cracked 
easily . 
It takes about 5-6 hours if the password is weak a high signal of the WiFi network you are going to hack and you have sometimes 10-12 for more complicated passwords and if the WiFi signal of the Network is weak .
The time taken also changes if the WiFi network you are going to hack has many other clients already accessing it .


You will be using two tools .
1.Commview for WiFi :
You will use this tool for capturing the packets sent and recieved through the Access Point you are going to hack .
The more packets you capture the better chances of cracking the password .
You will need more than 1,00,000 minium packets to crack the password .
The packets will be captured in the .ncp format . 
You will use this tool to convert the .ncp to .cap .

NOTE : Some WiFi cards are supported by Commview only in Windows 7 so i suggest you install Win 7 in ur Virtual Machine if ur card isnt supported .


2.Aircrack-Ng GUI :
You will use this tool to crack the password of the Access Point using the .cap files you obtained from the Commview application .

NOTE : You need to run this as administrator .

I have provided links for both the software below .




Download Links :

These are the links to the official website of the tools .
Some Anti Viruses might detect Aircrack as a virus . It is a false positive .

1.Aircrack-NG GUI 
Get it from here : http://www.aircrack-ng.org/


2.Commview for Wifi 
Get it from here : http://www.tamos.com/download/main/ca.php



GET READY TO CRACK :

STEP 1 :1.Install CommView for WiFi . It doesnt matter whether you install it in VoIP mode or Standard mode . I used VoIP .
It automatically installs the necessary drivers . Allow it to install . 

NOTE : You will not be able to connect to any Network using WiFi when using CommView .

STEP 2 :2.Click on the PLAY ICON in the Left First .



STEP 3 (Choosing the Network (a) ) : A new window should pop up now . 
Click on the START SCANNING button .

STEP 4 (Choosing the Network (b) ) :Click on the WiFi network you want to hack in the Right Coulumn and Click on CAPTURE.
NOTE : This tutorial is only for WEP protected networks .



STEP 5 (Capturing the Packets) :The windows should close now and you should see that CommView has started Capturing Packets .



STEP 6 (Saving the Packets ) :Now that the Packets are getting captured you need to Save them.
Click on Settings->Options->Memory Usage
Change Maximum Packets in buffer to 20000


Click on the LOGGING Tab .
Check AUTO-SAVING
In the Maximum Directory Size : 2000
Average Log File Size : 20


Now CommView will automatically Start Saving packets in the .ncp format at a size of 20MB each in the specified directory .

STEP 7 ( Concatenating the Logs ) :Since you are capturing a lot of logs you will need to concatenate them into once file .
To do this go to Logging and click on CONCATENATE LOGS 
Choose all the files that have been saved in your specified folder and Concatenate them .

Now you will have one .ncf file .

STEP 8 (Converting .ncf to .cap ) :Now that you have one file with all the packets you need to Convert it into .cap file for AIRCRACK to crack .
Click on File->Log Viewer->Load Commview Logs-> Choose the .ncf file 
Now File->Export->Wireshark/TCP dump format .


------------------------------------------------------------------


Aircrack Part :

Now for the Second Part Cracking this is very simple .

Just open the Aircrack Folder->Bin->Aircrack-ng GUI.exe

Choose the .cap file and you should be able to do the others .


If you have any questions or having problems post a thread il reply .

This is a simple tutorial . There is more advance using the rules and stuff but I havnt used it yet . This worked for me . Hope you found it useful .

Took a lot of time . Please leave your feedback.

Happy Hacking !


+++++++++++++++++++++++++++++++
This article was originally Published on : http://www.hackforums.net/showthread.php?tid=1467214,
i am just spreading the word and take no credit for writing this article!

Sharecash Downloader v1




Screenshots:





Using Instructions:

1. Run the file.
2. Enter the mirrored link of Sharecash like files.ml , filesup.net ,etc.
3. Click Navigate button.
4. After almost a minute, click download and it would prompt you something like below if you did everything right:



Download:

http://fileice.net/download.php?file=3169

The survey for the download is nothing compared to what you gonna use for all further downloads & my work put upon it, any leechers would be banned/reported if found doing so, you are not allowed to share it in any way without my permissions.

Virus Scan:

http://www.virustotal.com/file-scan/repo...1310212222

Well this is the question in every bodies mind that how can we hack a email account or How do others do it. When I started reading about Hacking I also search about this question and search for the Soft wares that can do it for me but there was nothing that work. Then comes the websites like hackfacebook.net that claim to hack 98% of facebook accounts for only 140 euros. But that is a BIG FRAUD. So question comes to mind How do we Hack the Accounts.

In real there are 5 ways to hack any account and they all work but there are not easy and not 100% efficient but with time you can master them all. The ways Are

1): Key logging
2): Phising
3): Brute force
4): Social Engineering (I call it Hacking the human ;) )
5): Guessing the Security Password.

I will Post a detailed Articles about all these ways soon but summaries are as following.

KEYLOGGING: Keylogging is the way in which you sent a Keylogger remotely or install it on a computer to which you have Physical access. Keylogger is a Program that note down every thing a user write on a computer and some Keyloggers also capture the Pictures of the screen. SO with this way you can Know the Password that the user write.

Phising: Phising is the way in which a person is tricked to go to a Fake website exactly like the real one (e.g. Facebook). And if that person enter the password then the password is stored in the website that the Hackers can get. This way works very well with Stupids ;)

Brute Force: Brute force is the way of hacking in which software try every possible password. This way is 100% accurate but it can take millions of years to complete. So it is complete failure most of times.

Social Engineering: This way is really efficient with your friend whome you can trick to tell you the sensitive information like asking them to accept a keylogger an trick the to tell you their security Question’s answer.

Guessing the Security Password: This way can be the easiest or most difficult. But if you know the person then you can easily answer the question

Well, I have made lots of posts on keyloggingindeed I have dedicated a whole book to this topic "An Introduction To keyloggers, RATS And Malware" which is available as a free download, Now If you are a regular reader of this blog thechances are very less that you might not know about keyloggers as I have written about it over and over agai. However in this post I will guide you simple ways to use a keylogger inside Meteasploit once you have opened up a meterpreter session with victims computer.  For those of you who don't know what metasploit is kindly refer the post "Metasploit For Beginners Explained"


What is a Meterpreter?

Basically a meterpeter is a simple type of interface which helps us in compltety automating the exploitation process. If you would like to learn furthur about meterpreter kindly do a google search.

Requirements

• Metasploit Framework
• BackTrack 5
• A Meterpreter session opened on a box

How To Use A Keylogger Inside Metasploit Using Meterpreter?

In this case I am using metasploit framework from backtrack 5, Backtrack 5 is an awesome linux distro which is specially dedicated to hackers and penetration testers, I have used Social Engineering Toolkit to utilize a browser autopwn in order to open up a meterpreter session on the victims computer.



Step 1 -  Before we start the keylogger and start capturing logs, we would need to migrate explorer.exe process as we don't want the our exploit to get closed, In order to migrate the process we would need the PID of the process, In order to get the PID type "PS" on the command line.

The Following are the best Torrent Sites!

1: The Pirate Bay (http://www.thepiratebay.org)


The Pirate Bay (commonly abbreviated TPB) is a Swedish website that provides magnet links. It bills itself as "The world's most resilient bittorrent site"and as of 6 July 2011 is ranked as the 88th most popular website in the world and 16th in Sweden by Alexa Internet and has over 4 million registered users. According to the Los Angeles Times, The Pirate Bay is "one of the world's largest facilitators of illegal downloading" and "the most visible member of a burgeoning international anti-copyright or pro-piracy movement". (Wikipedia)

2: Demonoid (http://www.demonoid.me)


Demonoid is a website and BitTorrent tracker created by an anonymous Serb known only by the pseudonyms "Deimos" and "Zajson". The website indexes torrents uploaded by its members. Demonoid.com was ranked the 502nd most popular website overall in December 2010, according to Alexa.Demonoid's torrent tracker had an estimated three million peers in September 2007.The site had over 252,427 torrents indexed as of May 3, 2009 (torrents uploaded prior to August 4, 2005 were removed to free server resources). (Wikipedia)


3: isoHunt (http://www.isohunt.com/)






isoHunt is a BitTorrent index with over 1.7 million torrents in its database and 20 million peers from indexed torrents. With 7.4 million unique visitors as of May 2006, isoHunt is one of the most popular BitTorrent search engines. Thousands of torrents are added to and deleted from it every day. Users of isoHunt perform over 40 million unique searches per month. On October 19, 2008, isoHunt passed the 1 petabyte mark for torrents indexed globally. The site is the third most popular BitTorrent site as of 2008. According to isoHunt, the total amount of shared content was more than 10.01 petabytes as of November 22, 2009.

Well if you people are tired up of seeing that same message that Google + is still not public, then I have a solution. You can get the invitation for free.
All you have to do is to like my facebook page and post your email on it's wall and you will get invitation within 12 hours!
My Facebook Page: http://www.facebook.com/hackthepc

Mantra is a collection of free and open source tools integrated into a web browser, which can become handy for students, penetration testers, web application developers,security professionals etc. It is portable, ready-to-run, compact and follows the true spirit of free and open source software.


The software is intended to be lite, flexible, portable and user friendly with a nice graphical user interface. You can carry it in memory cards, flash drives, CD/DVDs, etc. It can be run natively on Linux, Windows and Mac platforms. It can also be installed on to your system within minutes. Mantra is absolutely free of cost and takes no time for you to set up.

Mantra can be very helpful in performing all the five phases of attacks including reconnaissance, scanning and enumeration, gaining access, escalation of privileges, maintaining access, and covering tracks. Apart from that it also contains a set of tools targeted for web developers and code debuggers which makes it handy for both offensive security and defensive security related tasks.
Project Goals

• Create an ecosystem for hackers based on browser
• To bring the attention of security people to the potential of a browser based security platform
• Provide easy to use and portable platform for demonstrating common web based attacks( read training )
• To associate with other security tools/products to make a better environment.

You can download Mantra 0.6.1 here:
Linux 32-bit – Mantra Security Toolkit – Gandiva.tar.bz2
Windows – OWASP Mantra Security Toolkit – Gandiva.exe
Or read more here.

Recently i was watching some Tv Dramas on Megavideo and wondered if i could download the. There is built-in option for download of videos in Megavideo but that is only for Premium Users. So i found a way to download the videos for free.
The website that is used to download the Videos for free is http://www.rapid8.com . The procedure to download the Videos is simple. All you have to do is give link and then  click "Begin Download" Button.

===============
Video Tutorial
===============

Before we start, I just wanted to say this, This is tutorial for people which have no knowledge on configuring a iStealer server! If you have no knowledge on how to configure a iStealer server please read on!!

Also before we start we need to sign up for a free FTP service, I currently use http://www.drivehq.com so use that one, sign up and now lets start!

Step 1 ( Obtaining iStealer ):


Go to the following link:

*Note: This file was uploaded by me, it is safe, If you don't believe me nor want to download it search for it on google. I have been using this for a while so I consider it safe.

Download Link:
http://www.mediafire.com/?ruiw5yummdd

This application WILL be detected by your anti-virus. Of course online scanners detect it as infected.. it's a stealer you know..if you still believe this to be infected by me please do not download!


Step 2: (Extracting)
Right Click and extract "iStealer 3.0"

Once extracted there should be two files. One folder called "Icon Pack" and one application called "iStealer".

Double Click on "iStealer". There should now be a menu of options.

IF YOU GET ERROR MISSING COMDLG32.OCX
You can download the missing OCX here:
http://www.ocxdump.com/download-ocx-file...nload.html


Once you've downloaded the missing OCX extract it into WINDOWS>SYSTEM32

Step 3: (Creating your password stealer server)

Okay once iStealer is up there should be a menu with different options.

Where it says host copy and paste this "ftp.drivehq.com" without quotes.

Where is says username enter your drivehq.com username.

Where is says password enter your drivehq.com password.

Okay Once they are all done you can decide whether you want to bind your server(password stealer)
with another application, song, document, picture etc! Just click "bind with another file" and choose what file you want
to bind your server with.

Once you have done that you can decide whether or not you want to change the icon. (If you skip this
step there will be just a default icon). Just click "Change icon then go to the folder where you extracted
iStealer, then open up icon pack then choose one of the icons there.

Once you have choosen your icon make sure ALL boxes are ticked in the "Recovery Options".
Then go down to general settings and tick " Anti virtualPC / VMWare " (This will prevent the server from running on Virtual PC's)

Once you have done that click " Build " and your done!

Step 4: Spreading/Infecting people with your server

This involves some skill, patience and well creativity.
If you want to infect a small amount of peope like a friend, ex-girlfriend etc. Just bind the server with a legitiment file some examples are: A document, song (Be Creative). Use "ShockLabs File Binder" to bind the two files together, then ZIP the server and send it via MSN Messenger.

Before we move on I'd suggest we make our server FUD meaning that the iStealer server is completely un-detected by all Anti-Virus engines this can be done by finidng a FUD Crypter, search around on the forums Im sure you will be able to find a free one. But you may have to invest a small amount of money on one if you cannot find any.

If you want to infect a majority of people I would suggest using torrents. Create a new torrent claim it to be some keygen, crack or whatever and seed! Upload your torrent to torrent sites like PirateBay and Mininova.

Also youtube is another method. Upload a fake video, and get people to download your server.

There are many other methods, Just be creative!


Tutorial Written By: Mendacious